Tips To Assemble Your Cell Phone Booster System

Cell Phone Booster
Cell Phone Booster
Cell Phone Booster
Cell Phone Booster

Cell phone booster is the easiest of solutions for poor cellular reception. The device works like a signal repeater by taking in cellular signals and amplifying them to the required levels.

In this article, we discuss some relevant tips for installing cell phone booster system.

Minimize Cable Lengths As Much As Possible

Coaxial cables used to transmit signals contribute to attenuation in some way. Longer cable lengths contribute to increased attenuation. Using the shortest cable length as possible reduces signal loss that occurs in the cell phone booster system.

Ensure That There Is Enough Separation Between Antennas

Cellular signal booster works by means of its three primary components, external antenna, amplifier and internal antenna. The external antenna captures cellular signals from the outside and then sends them to the amplifier, which works on these signals and boosts them. The boosted signals are then sent to the indoor antenna which broadcasts them within its coverage area.

Ensuring there is enough separation between the external and indoor antenna is important to prevent oscillation. When the antennas lack the adequate separation, the signals sent out by the indoor antenna will be captured by the outdoor antenna and forced through the booster system again. This phenomenon referred to as oscillation results in serious performance issues of the booster.

Make Sure You Select High Quality Cable

Lower quality cables may cause significant signal loss. Going for cheaper cables of lower quality will adversely affect the performance of your cell phone booster. Good quality cables do not cause much signal loss.

If your cell phone booster kit comes with RG-59 cable, then upgrade to RG-6 cable. If your kit comes with RG-58 cable, then upgrade to LMR-400.

Choose Antennas By Considering The Outside Signal Strength

Omnidirectional antennas kept outdoors captures signals coming from all directions while directional antenna captures signals coming from a particular direction alone. Installation of omnidirectional antenna is easier than that of directional antenna but omnidirectional antenna has lower power.

It is advisable to choose omnidirectional antennas only if the outside signal strength is good. Omnidierctional antenna is commonly used when multiple carrier signals are to be boosted.

Add More Than One Internal Antenna If A Large Space Is To Be Covered

An indoor antenna will have a specific coverage area. If the area within which you require boosted signals is greater than the coverage area of the indoor antenna, you can consider installing more indoor antenna at the required points.

Having a high-performing cell phone booster installed at your place will ensure quality cellular communication.